# Grounding cascade digital director

**URL:** <https://forum.msbtechnology.com/t/grounding-cascade-digital-director/918>\
**Category:** Support\
**Created:** [September 7, 2025, 12:25pm UTC](https://forum.msbtechnology.com/t/grounding-cascade-digital-director/918 "2025-09-07T12:25:32Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![ofer60](https://avatars.discourse-cdn.com/v4/letter/o/f05b48/32.png) [@ofer60](https://forum.msbtechnology.com/u/ofer60)\
**Post date:** [September 7, 2025, 12:25pm UTC](https://forum.msbtechnology.com/t/grounding-cascade-digital-director/918/1 "2025-09-07T12:25:32Z")

</div>

hi

when i had the reference director i used shunyata

ground cable to the altaira.

but in the cascade director i don’t have grounding post.

can i ground without it?

thank you

---

<div class="post-metadata">

**Author:** ![Jonathan\_Gullman](https://yyz1.discourse-cdn.com/flex003/user_avatar/forum.msbtechnology.com/jonathan_gullman/32/682_2.png) [@Jonathan\_Gullman](https://forum.msbtechnology.com/u/Jonathan_Gullman)\
**Post date:** [September 8, 2025, 5:38pm UTC](https://forum.msbtechnology.com/t/grounding-cascade-digital-director/918/2 "2025-09-08T17:38:07Z")

</div>

We didn’t put a grounding post on the Cascade Digital Director as we didn’t want it grounded directly to the Cascade Analog Converter. This would defeat the point of the isolation we worked so hard to create.